To open the Visualfy Home Settings, do the following:

• Tap the Visualfy Home card. The view with its devices and alerts opens.
• Tap the gear icon at the top right.
  • A list of the configured devices appears. You can tap each one to do different actions.
  • You can also add a new detector by tapping the “+” button.

DSS #

If you tap the DSS card, a screen appears where you can change the device name, adjust the light brightness, schedule night mode and unlink it.

The following video shows how to do it:

Detector #

If you tap the card of one of the detectors, a screen appears where you can change the device name, adjust the light brightness, schedule night mode and unlink it.

The following video shows how to do it:

Frequently asked questions #

It won’t let me unlink the DSS; it always says to try again later #

The problem is that a detector has a poor connection. Move the detectors as close as possible to the DSS so they get a good connection back, and then unlink.

Where can I see if the detectors work properly? #

• In the app settings menu, tap the DSS name.
• The next screen shows the DSS and all the detectors you have connected, with their status.

It won’t let me unlink the detector. #

Move the detector to the socket closest to the DSS to improve the connection, and then try to unlink it again. Please check that the DSS green light is steady; if it is flashing, you have an Internet connection problem and should contact your provider. If you still have problems unlinking it, contact our Customer Support.